Sample preconditioning
An on-line analyzer can only perform as good as the precondition system delivers sample for measurement. Many applications require sample preconditioning in order to present a suitable sample to the analyzer. If yours does, we can prepare or condition the sample before the measurement takes place. Maintenance-free operation is crucial in the design of these.
AppliTek has extensive experience with technologies such as filtration, temperature control, flow Control, pressure control, phase separation, settling, liquid removal, fast loop supply, coalescence, evaporation, liquefaction… for liquids, slurries, powders and gasses. Please contact us for your application.
Our standard range of products for sample preconditioning is designed for water matrices:
Filtration
Application: water
ModuSize® 50 µm - 100 µm - 200 µm - 2mm self-cleaning high flow filtration system with automatic blowback, stainless steel filter element, static pressure regulator
The following fast-loop systems are designed for insertion in a non-filtered pipe section or a container and shall be supplied with a separate sample pump unit:
EZ-Size® 50 µm - 100 µm - 200 µm - 2mm self-cleaning filtration system with automatic blowback
UltraSize® 0.4 µm self-cleaning filtration system with automatic blowback, fiber type
MicroSize® 0.25 µm self-cleaning filtration system with automatic blowback, membrane type
Dilution / Settling
Application: all liquids
Specific applications: anaerobic digester, saturated brine
EZ-Dilute® dilution and/or settler system, can be combined with 50 µm - 100 µm - 200 µm - 2mm stainless steel element, flow meter for dilution check, automatic cleaning