EZ-Caustic™
On-line Monitoring of Caustic Scrubbers AppliTek’s proprietary on-line analyzer system EZ-Caustic™ was developed to monitor and control the scrubber performance by determinatio......
Process control
Determination of oxygen in vent gases
The purpose of determining oxygen in the chlorination process is to control the O2/C2H4 ratio in the reactor in order to keep oxygen levels outside flammability limits. The on-line......
Determination of ethylene in vent gases
The purpose of determining ethylene in the chlorination process is to minimize ethylene losses by feedback control of C2H4 / Cl2 ratio in the chlorination reactor. The on-line anal......
Determination of ferric chloride in liquid phase EDC
The purpose of determining ferric chloride in liquid EDC (ethylene dichloride) is to avoid contamination of EDC and decrease risk of corrosion to production units. For all other an......
Determination of oxygen in vent gases
The purpose of determining oxygen in the oxychlorination process is to control the O2/C2H4 ratio in the reactor in order to keep oxygen levels outside flammability limits. The on-l......
Determination of ethylene in vent gases
The purpose of determining ethylene in the oxychlorination process is to minimize ethylene losses by feedback control of C2H4 / Cl2 ratio in the oxychlorination reactor. The on-lin......
Determination of CO/CO2 in vent gases
Determining levels of CO and CO2 and their respective ratio in the oxychlorination reactor contributes to overall process efficiency. The on-line analyzer system uses a selective C......
Composition of vent gases
Monitoring the vent gases of the oxychlorination reactor can be used to quantify its exact composition and allows to control emissions before further processing by scrubbers or abs......
Determination of water in liquid phase EDC
The purpose of determining water (moisture) content in liquid EDC (ethylene dichloride) is to decrease risk of corrosion and damage to production units downstream. For all other an......
Determination of water in gas phase EDC (cracking furnace feed)
The purpose of determining water (moisture) content in liquid EDC (ethylene dichloride) is to decrease risk of corrosion and damage to the cracking furnace. The on-line analyzer sy......
